Advanced Manufacture process and high-end fabrication material
Heavy rotor design and tight test method improve the rotor performance.
Overall type cast steel structure bearing base improves anti load resistance capacity.
Hydraulic jacking device and hydraulic regulated discharging port is helpful to save labor and time.
Impact breaking is a kind of crushing machine which uses impact energy to crush materials. When the material enters the action area of the plate hammer, it will be broken by the high-speed impact of the plate hammer, and it will be thrown to the impact device installed above the rotor to be broken again, and then it will bounce back from the impact lining plate to the action area of the plate hammer to be broken again. This process is repeated until the material is crushed to the required size and discharged from the lower part of the machine. By adjusting the gap between the reaction frame and the rotor frame, the particle size and shape of the material can be changed. The spring safety device is used behind the impact plate of the machine. When the non broken materials enter the crushing chamber, the front and rear impact frames retreat, and the non broken materials are discharged from the machine.
| Model | Rotor spec (mm) | Feed opening (mm) | Maximum feeding size (mm) | Capacity(t/h) | Power(kw) | Overall dimension (mm) |
| PFW1214II | Ф1150×1400 | 1100×1430 | 500 | 130-200 | 132 | 2400×2310×2550 |
| PFW1315II | Ф1300×1500 | 1200×1530 | 600 | 180-320 | 200 | 2700×2570×2800 |
| PFW1318II | Ф1300×1800 | 1200×1830 | 700 | 240-400 | 250 | 2700×2870×2800 |
| PFW1415II | Ф1400×1500 | 1450×1530 | 700 | 300-480 | 250 | 2900×2700×3000 |
| PFW1214Ⅲ | Ф1150×1400 | 570×1430 | 250 | 90-170 | 132 | 2550×2310×2100 |
| PFW1315Ⅲ | Ф1300×1500 | 625×1530 | 300 | 180-270 | 200 | 2960×2570×2380 |
| PFW1318Ⅲ | Ф1300×1800 | 625×1830 | 300 | 220-300 | 250 | 2960×2870×2380 |
| PFW1415Ⅲ | Ф1400×1500 | 800×1530 | 350 | 280-350 | 250 | 3120×2650×2660 |
| NOTE: Capacity is according to medium hard limestone.The size,humidity level and characters of materical swill influence the capacity. | ||||||
Advanced Manufacture process and high-end fabrication material
Heavy rotor design and tight test method improve the rotor performance.
Overall type cast steel structure bearing base improves anti load resistance capacity.
Hydraulic jacking device and hydraulic regulated discharging port is helpful to save labor and time.
Advanced Manufacture process and high-end fabrication material
Heavy rotor design and tight test method improve the rotor performance.
Overall type cast steel structure bearing base improves anti load resistance capacity.
Hydraulic jacking device and hydraulic regulated discharging port is helpful to save labor and time.
